@greggorievich wrote:
Hey All!
I finally worked my schedule (and wallet) to get my 90cm dish professionally pointed, but I can't seem to get my ORxPi receiver working.
Some Specs:
90cm FTA dish with a linear Ku LNB pointed at Galaxy 19.
Raspberry Pi Model B. (Not a B+)
8 GB Kingston MicroSD card in an SD adapter. No external storage.
Geniatech HDStar Receiver, purchased from the Outernet store.
ORXPi v0.2.9 / Librarian 0.4.post9When I first install with a new SD card, it will show a lock and good signal strength (though the signal strength and quality differs if I select a Universal or North American Ku Band LNB.
After a while, the indications that it's downloading files stop, and it will often show no signal anymore. Sometimes, trying to change tuner settings will give an error that it cannot find any tuner connected.
Sometimes, rebooting the Pi, receiver, both, or disconnecting and reconnecting the USB cable between will bring back the connection. At some point, I think with v0.2.7, I managed to get several files to show up in the library, but trying to click on any of them led to a 404 page.
Can anyone share any suggestions on getting things working? I'm not a linux expert by any means, but I"m vaguely familiar. Links to some text data are below.
PuTTY Log including dmesg and lsusb commands:
https://www.dropbox.com/s/k2y1gxfvmsdxzwk/putty-2015-11-24-175504.log?dl=0Application Log:
https://www.dropbox.com/s/qustkqntvrxa1wo/librarian_0.4.post9_2015-11-25_20-38-21.log?dl=0System Log:
https://www.dropbox.com/s/z7iol2j4elar77u/messages_0.4.post9_2015-11-25_20-38-32?dl=0
Posts: 6
Participants: 3