@kalashnikov wrote:
i am formating the sd on a diferent device, is this a problem ?
the sd just work on 2.3.000 LH whit a factory default, but today the sd not was not the main disk of storage...
[28643.162844@1] sd: card 0001 removed
[28664.688180@1] normal card in
[28665.182689@1] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
[28665.469333@1] sd: SD Status: Invalid Allocation Unit size.
[28665.476151@1] sd: new high speed SDXC card at address 0001, clock 50000000, 4-bit-bus-width
[28665.486647@0] mmcblk0: sd:0001 00000 58.5 GiB
[28665.503507@0] mmcblk0: p1
[28666.191779@1] EXT4-fs error (device mmcblk0p1): ext4_find_entry:1309: inode #2: comm hotplug.storage: reading directory lblock 0
[28669.211459@1] EXT4-fs error (device mmcblk0p1): ext4_find_entry:1309: inode #2: comm hotplug.storage: reading directory lblock 0
[28669.567817@0] wetek-dvb dvb.8: stop_feed_dmx0
[28669.567842@0] wetek-dvb dvb.8: FLUSH FIFO0
[28669.567851@0] wetek-dvb dvb.8: FLUSH ok
[28672.551979@1] EXT4-fs error (device mmcblk0p1): ext4_read_inode_bitmap:175: comm hotplug.storage: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1041
[28672.804378@0] wetek-dvb dvb.8: start_feed_dmx0
[28672.804404@0] wetek-dvb dvb.8: FLUSH FIFO0
[28672.804416@0] wetek-dvb dvb.8: FLUSH ok
[28672.804425@0] wetek-dvb dvb.8: FIFO0<->0
[28672.805394@0] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1489000 symbol_rate=11719000
[28672.823109@0] Buffer I/O error on device mmcblk0p1, logical block 7372800
[28672.823125@0] lost page write due to I/O error on mmcblk0p1
[28672.823156@0] JBD2: Error -5 detected when updating journal superblock for mmcblk0p1-8.
[28672.862392@0] i2c i2c-1: BF is 64,BW is 10688
[28673.362668@0] i2c i2c-1: Tuner successfully lock!
[28673.562663@0] i2c i2c-1: Service locked!!!
[29061.089894@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1489000 symbol_rate=11719000
[29061.148872@1] i2c i2c-1: BF is 64,BW is 10688
[29061.649181@1] i2c i2c-1: Tuner successfully lock!
[29061.809232@1] i2c i2c-1: Service locked!!!all log
Posts: 3
Participants: 3