Only US Satellite sending?
@Benoit_Panizzon wrote: Hi Group Today I noticed that my Dreamcatcher hat lost lock. As usual I suspected the active antenna had stopped working and did try unplugging and plugging it in again. No...
View ArticleStarting Again to keep busy
@donde wrote: For many months my Outernet not in service. I had these parts up and running: Passive patch antenna, LNA, RTL-SDR, Raspberry Pi (not sure which Pi version) All parts except Pi from...
View ArticleNo lock, just Const Lock
@lelappe wrote: I can't get my outernet working again. Equipment used: chip computer, E4000 dongle, active patch antenne ,lna..all parts came from Outernet. It did work for quite some time, but now:...
View ArticleAPRS feed from Skylark 4.4?
@Mads wrote: Has any of you successfully used the YAAC - Skylark 4.4 combination to track aprs stations on a map? I want to test this when Alphasat gets back online. Posts: 1 Participants: 1 Read full...
View ArticleDreamcatcher V2.03 kit
@donde wrote: Just received Dreamcatcher 2.03, active patch antenna, short SMA cable, and 4 GB micro SD card. I have received Outernet data for many months with RPi, SDR, LNA, non-active patch...
View ArticleNewbie help (pi3 rtlsdr v3 dongle) bias t with L-band Antenna with Integrated...
@method45 wrote: Hi from the UK.I purchased the L-band Antenna with Integrated Amplifier and SAW Filter.I have paired it up with a Pi 3 and an rstlsdr v3. I have tried briefly to get a downlink I can...
View ArticleTerm meaning Skylark
@donde wrote: I see word TRANSFERS on Status page of Skylark. Never see a value.New to Skylark. Posts: 3 Participants: 2 Read full topic
View ArticleWeather not displaying on Raspberry Pi
@Nick wrote: I am running Outernet on a Raspberry Pi 3. Everything seems to work well, except for the weather. When I select weather, I drill down to folders, but never see the weather globe display....
View ArticleFIle download in "Tuner" sits at "Complete" for a long period of time
@nbkhwjm wrote: after completing my external monitoring application for the DC / Outernet, i noticed something interesting. in my application it computes the % complete based on the expected block...
View ArticleDashboard Balloons
@donde wrote: When receiving stations are very close, balloons overlap and can't be seen. Any way to correct this? Maybe rotate the balloon a few degrees. Extreme zooming helps to separate them a bit....
View ArticleFile download from 98W
@donde wrote: Back from many months not receiving.Today I see opaks/33bb-gfs.201710050... 62%. No change for many hours.I remember these stuck downloads. How now? Posts: 4 Participants: 2 Read full...
View ArticleDreamcatcher Shut Downs
@kenbarbi wrote: I have been experiencing the loss of Dreamcatcher network connectivity over a period of several (1 -3) days. (Running in the Hot Spot mode produces the same problem, so its not my...
View ArticleDreamcatcher Power Saving
@donde wrote: May have been asked before. Does the current version board have a power saving or sleep mode? Posts: 1 Participants: 1 Read full topic
View ArticleI my CHIP useless now?
@Bill_L wrote: I have been kind of out of the loop. The CHIP is no longer supported? Posts: 2 Participants: 2 Read full topic
View ArticleIt's this software still working?
@iw0hk wrote: Hello,i' have downloaded the software for Windows here: https://archive.outernet.is/images/OuternetInABox/Release_2/ All it's ok after installation, i can receive the signal with nice...
View ArticleWifi dongle used on DC
@lmantuno wrote: Apologies if this has been already covered..the lsusb command in Skylark 4.4 reports 0bda-8176 as the USB VID/PID code for the EDUP dongle.This apparently means the dongle uses the...
View ArticleDreamcatcher 5 volts in
@donde wrote: I don't want to use either microusb jacks on board for 5 volt power In. Where on board are proper 5 volt and ground pins closest to either microusb jacks? A block diagram of the board...
View ArticleOuternet signal for other porpouse
@Tommaso_Mirante wrote: i should like to use outernet signals for an experimental version of passive radar . i require the possibility to know all satellite capable of generate outernet signal name...
View ArticleNew image - with new EMEA frequency
@Abhishek wrote: New Skylark Image for Dreamcatcher is now live on archive: https://archive.outernet.is/Dreamcatcher%20Skylark/skylark-dc-1710101557.img.gz The image is now common to both, active and...
View ArticleThe Outernet SDRx L-band RTLSDR is Brilliant!
@Jacob wrote: At the risk of sounding like I've something to gain from plugging this receiver - I'll go ahead anyway.Got this out of the box yesterday, plugged it in, and even with my tinfoil antenna...
View Article